Styrene Polymerization Pilot Plant

The device is equipped with a nitrogen purge and a number of liquid and material flow path; The device is for a variety of liquid and solid raw material mixture in the solution dubbed glue pot, and then raises metering pumps and precisely metered by agent. After sufficient mixing by a static mixer, the prepolymer is into the reaction vessel after the reaction was carried out by high pressure metering gear pump into a static mixer reactor eight or four column reactor.

Feature
The new tower tank reactor design.
Tubular reactor process overcomes the disadvantages of traditional high load stirring, mechanical failure and much more.
Under no mechanical agitation throughout the process, reach online mixing
Unified response operations and switching instrumentation and PLC-controlled secondary

Function
SOL research
Prepolymer research
Polymerization of the tower research
Polymerization of the tube  research
Multiple security  protection
Measurement and control of online temperature, pressure, flow viscosity  and etc.
The Main Technical Specifications

The Main Technical Specifications

Control Range	Use Range	Measure Ctrl
Accuracy of measurement or control
Sol kettle	0～2.5MPa℃
Prepolymer reactor	0～1.6MPa℃
Initiator installed capacity	＜2L	±0.37%
Reactor	φ57-159×1000	6-10MPa ±1%、6MPa ±1%
Control work temperature	0～200～6MPa
Nitrogen pressure
Capacity max design	2-10㎏/hr